Epoxy paint is an outstanding choice for covering basement, garage, and patio floors. Epoxy coating utilizes a chemical mix of two liquid components, hardener and epoxy resin, to create a tough, solvent-resistant finish that can be applied to floors, decks and countertops. Several types of epoxy are noted for their sturdiness and can be used to seal concrete floors, steel and other industrial materials.
Here are some of the characteristics of Santa Barbara Epoxy Floor Coatings:
- Epoxy coatings are utilized as industrial floor coatings due to their durability, chemical resistance, low porosity and powerful bond strength.
- An Epoxy coating comprises a ‘curing’ and a ‘base’ agent. The two components are mixed in a definite ratio. A chemical reaction takes place between the two parts generating heat and hardening the mixture into an immobile, hard ‘plastic’.
- Santa Barbara Epoxy Garage Floors when exposed to UV light can turn into yellowish in color due to direct sunlight. This yellowing can be a genuine problem for some applications. This can be concealed by selecting a darker color of pigmented epoxy. Clear epoxies will yellow and may even cloud up. For this reason epoxies are at times top coated with polyaspartics, latex, and urethanes that will keep their color and eye-catching gloss. This is suggested if color stability or matching colors is essential.
- After the two epoxy parts are mixed there is a working time during which the Santa Barbara Commercial Epoxy Floors can be used or applied. Usually the pot life will be everyplace from minutes to one hour. At the end of the pot life the mixture becomes very hot and further speeds up the hardening.
- Epoxy Resins will solidify in hours or minutes, but complete cure will usually take several days. Most epoxies will be rightfully hard within a day or so, but might need more time to solidify before the coating can be sanded.
- In theory, a temperature change of 10-15 degrees F. will double or half the pot life and cure time of an epoxy coating. Higher temperatures will reduce the viscosity (thin) the epoxy, but also decrease the working time an individual has to apply the epoxy.
- Usually epoxy floors become too thick and cure too leisurely to be applied at temperatures below 50 or 60 degrees F. Temperatures between 65 and 85 degrees F are best for setting up. After the epoxy has cured, it can deal with temperatures well below zero degrees F and in the case of high temperature epoxy coatings above 300 degrees F.
- Standard epoxy floors will start to alleviate at about 140 degrees F, but will re-solidify when the temperature is lessened. For common epoxies this temperature is approximate upper end of working temperature range of epoxies. Special high temperature epoxies are available but come with additional cost.
- By nature, epoxy resins of Santa Barbara Residential Epoxy Floor are hard and fragile. Additives can be added to epoxies that make them less fragile, but usually at the loss or reduction of other positive epoxy properties such as chemical resistance.
These are some of the characteristics of epoxy floor coating.